Skip to main navigation Skip to search Skip to main content

Rubber-Tracked Forwarders-Productivity and Cost Efficiency Potentials

    Publication: Contribution to journalJournal articlepeer-review

    4 Downloads

    Abstract

    The extraction of timber is expensive, energy intensive, and potentially damaging to the forest soil. Machine development aims to mitigate risks for environmental impact and decrease energy consumption while maintaining or increasing cost efficiency. The development of rubber-tracked forwarders has gained renewed interest, not least due to climate change leading to unreliable weather in combination with low tolerance for soil damage. The increased cost of rubber tracks compared to wheels is believed to be compensated by higher driving speed enabled by semi-active suspension. Thus, the aim of this study was to theoretically investigate how the productivity and cost efficiency of rubber-tracked forwarders are affected by variations in driving speed and machine costs. The calculations were made with fixed stand parameters, to evaluate performance in well-defined working conditions, and with parameters from 2500 final felling stands in central Sweden, to evaluate performance in varied working conditions. Scenarios were compared to a baseline corresponding to mid-sized wheeled forwarders. The results show higher productivity with the increased driving speed enabled by rubber tracks and suspension at all extraction distances, with larger differences at long extraction distances. Assuming a 15% higher machine price for the rubber-tracked forwarder and a variable cost increase proportional to speed increase, extraction costs break even with the baseline at 400 m and 700 m extraction distance for moderate and fast driving speed, respectively. Furthermore, a rubber-tracked forwarder is likely to enable access to a larger part of the harvest area during longer seasons. For the studied set of stands, the year-round accessible volumes are estimated to increase from 9% to 92% with a rubber-tracked forwarder. With rubber tracks instead of wheels, good accessibility has the potential to be combined with low soil impact and cost efficiency in a favourable way for both industry and ecosystem.
    Original languageEnglish
    Article number284
    Number of pages16
    JournalForests
    Volume15
    Issue number2
    DOIs
    Publication statusPublished - 2024

    Bibliographical note

    Publisher Copyright:
    © 2024 by the authors.

    UN SDGs

    This output contributes to the following UN Sustainable Development Goals (SDGs)

    1. SDG 13 - Climate Action
      SDG 13 Climate Action
    2. SDG 15 - Life on Land
      SDG 15 Life on Land

    Keywords

    • CTL logging
    • accessibility
    • machine prototype
    • soil impact
    • timber extraction

    Cite this